Jump to content
Sign in to follow this  
  • entries
    5
  • comments
    6
  • views
    17,256

What's inside the new Rotax oil filter?

Sign in to follow this  
Admin2

1,356 views

What’s in an oil filter?

Funny you should ask

Rotax has a new addition to their parts inventory, the new Rotax oil filter and it’s manufactured by Mahle, part #825-010 (012) and made in Austria. Rotax took a look at all the different engine installations out there and I believe they thought it was time for achange and a change for the better it was. The new oil filter comes in an all white box verses the old filter box that was blue/white. It is slightly longerby 3.5mm or .138 in., but this is not where the changes stop by any means. They made some sweeping changes. Some of these changes are specifically designed with the mounting of the oil tank in mind. This is important because we have a dry sump system and not a wet sump. The white silicone drain back preventer (valve)is improved with little to no oil being allowed to drain out of the filter while the engine just sits. This was designed for the engine setups where the oil tank is mounted a little too low and prevents the oil from draining back into the tank and out of the filter and engine. Another change was the additionof a “one way check valve”. This feature is for those oil tanks mounted too high above the recommended oil tank location and keeps oil from draining out ofthe tank back down into the engine. The next change is a new bypass pressure spring. The old filter used a piece of spring steel. This new oil filter has a smooth round edge spring so it doesn’t have any sharp edges to wear through the filter housing. The old bypass pressure was 1.1 bar or 16 psi. This new filter is 1.2 bar or 18 psi. This will stop some of the oil filters from opening for a second or two at start up. The old oil filter could be pre-filled with oil which was easy, but this filter you can’t pre-fill with oil and you must turn the prop to put oil into the filter before your first start after an oil change.

 

So you see Rotax has made some fairly big changes to the inside of the oil filter to better help its users deal with their different engine applications. I have attached several pictures so you may see what is actually on the inside. I swore I wouldn’t cut open a perfectly good filter and wait for a used one, but curiosity got the better of me. For the photography critics out there, no I didn’t quit my day job. biggrin.gif

 

I hope this helps you to understand the new Rotax oil filter.

 

Be safe out there!

 

 

 

 

 

The Dog


Sign in to follow this  


2 Comments


Recommended Comments

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×