Jump to content

Roger

Members
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Roger

  1. Roger
    I have sadly sold my CTLSi, and have a supply of spares and accessories available. As a Rotax certified technician - Stage 2 B.U.D.S dongle with software, used only a couple of times. Cost $1095.00 $650.00 Brand new boxed complete Rotax oil tank. $375 pm me cjbjer(at)gmail.com Thanks.
  2. Roger
  3. Roger
    Is it really necessary to pull the wing to change it, or can it be done in place ? Looks tight.
  4. Roger
    That’s exactly what I did at the last Annual. Works a treat.
  5. Roger
    Got a picture ?
  6. Roger
    Thank you, appreciated.
  7. Roger
    By binding, I mean the wheel when lifted off the ground and rotated, does not spin freely but is still in contact with the disc. regarding the witness marks I’ll check, thanks again.
  8. Roger
    Thanks. The brakes are binding though there’s still plenty of brake pad left. Might just need to disassemble and clean
  9. Roger
    Do I need to remove the wheels to change the brake pads? My MM describes the other brake system.
  10. Roger

    Where did it go?

    Roger posted a topic in Video

    Someone posted a link to a documentary video on the CT just recently, but I can’t find it. Thanks.
  11. Roger
    What status would it then become from their point of view ?
  12. Roger
    Pleased to see the new plug version has the reinforced tabs. Mine broke off within a few days.
  13. Roger
    +1
  14. Roger
    Incorrect. The CTLSi , at least those produced in Europe ( are they produced any differently for other markets ?) , have the same (cannot insert/start) ignition, without the fuel lever being moved to the UP position
  15. Roger

    Cup Holders

    Roger replied to Roger's topic in Random Thoughts

    Thanks, tried that, not enough room in the CT.
  16. Roger
    Anyone come up with an idea for cup holders yet ?
  17. Roger
    Sure I’ll take it. PM me. Thanks.
  18. Roger
    Agreed. However, with only one installed, perhaps any WiFi download MAY only work on the unit with the adapter attached?
  19. Roger
    If two are needed, why was there only one installed? I mean, do you really need two, if not I would purchase the extra one you have.
  20. Roger
    Well I finally got to the hangar and fitted the plugs. Perfect, nice job. I was concerned they may not fit my CTLSi. Thanks. Now how about a set to fit the backs of the wing spar bolts next to them ...................
  21. Roger
    Count me on for a pair. send me a PM with your PayPal or address please. thanks
  22. Roger
    +1 count me on too.
  23. Roger
    +1
  24. Roger
    Thanks for the clarification.
  25. Roger
    Just curious, why wouldn’t you cruise in the 4K rpm range ? Because it’s too lean as you say ? Thanks.
×
×
  • Create New...