Bobby CAU Posted May 7, 2012 Report Share Posted May 7, 2012 1. how to change or debonder the pos light at the wings 2. can i replace the current pos light with aveo ultra 3in1 3. any strobebox in CTSW any one can help me please ... Link to comment Share on other sites More sharing options...
Roger Lee Posted May 8, 2012 Report Share Posted May 8, 2012 Hi Bobby, The wing tip lights are held on by a screw and lots of silicone. FD could have used a little around the edges, but they put it over the entire back side. Take a thin blade putty knife and work it under the pointed end. Then work it more and more towards the fat end. It will come right off. There is no strobe box. use a light that is self contained. There are probably several that would work. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 8, 2012 Author Report Share Posted May 8, 2012 hello Master LEE, again thanks ... i would try it by soon since my current pos light is off now. how possible to replace with AVEO 3 in 1?. should be ok right?. AVEO 3 in 1 has pos, nav and strobe in one while the current from FD is only pos light and not that bright too. thanks master LEE Hi Bobby, The wing tip lights are held on by a screw and lots of silicone. FD could have used a little around the edges, but they put it over the entire back side. Take a thin blade putty knife and work it under the pointed end. Then work it more and more towards the fat end. It will come right off. There is no strobe box. use a light that is self contained. There are probably several that would work. Link to comment Share on other sites More sharing options...
Roger Lee Posted May 8, 2012 Report Share Posted May 8, 2012 These work well. I know someone with them. They are bright. http://www.aircraftspruce.com/catalog/elpages/aveopowerburst.php Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 8, 2012 Author Report Share Posted May 8, 2012 Thanks master Lee. I bought aveo 3 in 1 from aircraft spruce as well, quite expensive i recognize but as long it bright and safe to me then im ok. Aviotion is expensive and safety is priceless. Thanks master Lee. These work well. I know someone with them. They are bright. http://www.aircraftspruce.com/catalog/elpages/aveopowerburst.php Link to comment Share on other sites More sharing options...
Roger Lee Posted May 8, 2012 Report Share Posted May 8, 2012 No master here, just Roger or Friend. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 8, 2012 Author Report Share Posted May 8, 2012 thanks Roger my friend ... appreciate it much !! tomorrow i will try to work it out. will keep you update. No master here, just Roger or Friend. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 8, 2012 Author Report Share Posted May 8, 2012 dear Roger, one more things i almost forget, in aveo 3 in one the one i bought (http://www.aircraftspruce.com/catalog/elpages/aveoeseries.php) has 3 light, pos, nav and strobe. should i makes another switch for each or just let it on at the same time with one switch?. please advise ok. No master here, just Roger or Friend. Link to comment Share on other sites More sharing options...
Roger Lee Posted May 8, 2012 Report Share Posted May 8, 2012 Hi Bobby, That's a good question. I might leave it on one switch, but maybe someone else here has another thought. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 8, 2012 Author Report Share Posted May 8, 2012 Thanks roger for the help. Leave it as one might more ok i think and being seen is much safe. What do you think? Link to comment Share on other sites More sharing options...
chanik Posted May 8, 2012 Report Share Posted May 8, 2012 You either need to tie the VCC for strobe and position lights together or you need to snake another wire throught the wing if you want to use separate switches. I'm not sure how easy that is; depends how big the wire tunnel is through the wing. You need another wire if you want the stobes to synchronise with each other. Link to comment Share on other sites More sharing options...
N89WD Posted May 9, 2012 Report Share Posted May 9, 2012 Leave the whole thing on one switch, you'll be glad you did Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 9, 2012 Author Report Share Posted May 9, 2012 Leave the whole thing on one switch, you'll be glad you did Dear Roger and All, thanks for your all feedback. im successfully removed the current pos light and replace with AVEO 3 in 1 AURORA series, it took about 2hour for me to debonder the glue. im using fishing rod string to cut all the glue but before im applying GO GONE oil to soft the glue. please see the photo attach. now im having an issue after the installation, i had little induction noise thru my headset due the strobe. any one has idea about this. i put all light to 1 switch. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 9, 2012 Author Report Share Posted May 9, 2012 Dear Roger and All, thanks for your all feedback. im successfully removed the current pos light and replace with AVEO 3 in 1 AURORA series, it took about 2hour for me to debonder the glue. im using fishing rod string to cut all the glue but before im applying GO GONE oil to soft the glue. please see the photo attach. now im having an issue after the installation, i had little induction noise thru my headset due the strobe. any one has idea about this. i put all light to 1 switch. Link to comment Share on other sites More sharing options...
CT4ME Posted May 9, 2012 Report Share Posted May 9, 2012 Here's video of Bobby's lights in action! Nice... tim Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 9, 2012 Author Report Share Posted May 9, 2012 hahaha ... THANKS Tim for the help ... appreciate it ... another video will be if anyone can help regarding my question of noise induction, please assist me ok. regards, Bobby CAU Link to comment Share on other sites More sharing options...
chanik Posted May 9, 2012 Report Share Posted May 9, 2012 I was wondering how well Aveo managed to filter the pulsed strobe current. Seems they don't. So this is a bit trial and error but you need to choke the current and filter the voltage to the lights. I would try this combination of series choke and shunt cap. The coil connects in series with the +12V to VCC lines and the cap should go after the coil and to ground with the negative (careful not to mix that up). There is no high frequency like with a true Xenon strobe but the 3.2Amp current pulses can play havoc with the line voltage. I was worried about this since I can faintly hear when my transponder is interrogated so I know the combination Ducati regulator, battery, sketchy wiring setup in the CT does not do a great job with line regulation. http://search.digikey.com/us/en/products/2324-H-RC/M8847-ND/775386 http://search.digikey.com/us/en/products/ESMH160VSN473MR50T/565-2620-ND/757833 Link to comment Share on other sites More sharing options...
Greg Posted May 10, 2012 Report Share Posted May 10, 2012 I was wondering how well Aveo managed to filter the pulsed strobe current. Seems they don't. So this is a bit trial and error but you need to choke the current and filter the voltage to the lights. I would try this combination of series choke and shunt cap. The coil connects in series with the +12V to VCC lines and the cap should go after the coil and to ground with the negative (careful not to mix that up). There is no high frequency like with a true Xenon strobe but the 3.2Amp current pulses can play havoc with the line voltage. I was worried about this since I can faintly hear when my transponder is interrogated so I know the combination Ducati regulator, battery, sketchy wiring setup in the CT does not do a great job with line regulation. http://search.digikey.com/us/en/products/2324-H-RC/M8847-ND/775386 http://search.digikey.com/us/en/products/ESMH160VSN473MR50T/565-2620-ND/757833 Link to comment Share on other sites More sharing options...
Greg Posted May 10, 2012 Report Share Posted May 10, 2012 Kirk I wish I had a clue what you are talking about. Nevertheless, I appreciate all the info from you smart members See you in Page Greg Link to comment Share on other sites More sharing options...
chanik Posted May 10, 2012 Report Share Posted May 10, 2012 Hah, well I'm too lazy to post my own a circuit picture. Make it look like this http://campus.udayton.edu/~physics/blb/Lecture%20Notes%20Exp%2010%20211_files/image039.gif The connection to the lights is in parallel with the capacitor, top to both Vcc connections and bottom is common ground. Link to comment Share on other sites More sharing options...
Bobby CAU Posted May 11, 2012 Author Report Share Posted May 11, 2012 thanks Kurt ... appreciate it much, i will try now. Hah, well I'm too lazy to post my own a circuit picture. Make it look like this http://campus.udayton.edu/~physics/blb/Lecture%20Notes%20Exp%2010%20211_files/image039.gif The connection to the lights is in parallel with the capacitor, top to both Vcc connections and bottom is common ground. Link to comment Share on other sites More sharing options...
chanik Posted July 5, 2012 Report Share Posted July 5, 2012 I haven't heard back from you; how well did the filter work getting rid of the electrical strobe noise? Link to comment Share on other sites More sharing options...
Bobby CAU Posted July 5, 2012 Author Report Share Posted July 5, 2012 hello Kurt, thanks for asking, im leaving jakarta for almost few month. i cant manage to filter the pulse till today. regards, Bobby CAU Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.