gisurvey Posted March 31, 2014 Report Share Posted March 31, 2014 Hello everybody, Can somebody help me please with the connection of additional starter button to the existent key ignition module (Kraus&Naimer CAD11 - CTLS 2008)? Ignition relay cable is in slot 6, but I'm not very sure which one is the other contact slot to be used. Thanks, Alec Link to comment Share on other sites More sharing options...
Roger Lee Posted March 31, 2014 Report Share Posted March 31, 2014 Hi Alec, Do you have the Bullyhawk or Rotax softstart? If you have the Rotax there is no need to modify anything just conect two red wires to the ignition solenoid on the firewall. Are you re-wiring the instrument panel? Link to comment Share on other sites More sharing options...
gisurvey Posted April 1, 2014 Author Report Share Posted April 1, 2014 Bullyhawk/Connair module. I need to isolate only one magneto circuit on starter ignition and I don't want to introduce breakers on magnetos circuits (this could be another variant). In order to do this I need to change the ignition starter from key (module pos.4) to additional button (recommended procedure by Connair). Link to comment Share on other sites More sharing options...
Roger Lee Posted April 1, 2014 Report Share Posted April 1, 2014 It is possible to disconnect one ignition wire from the back of the keyed switch and put it on its own flip switch. Then you would start on only one module. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.