Bobby CAU Posted June 3, 2014 Report Share Posted June 3, 2014 dear CTFlier friends ... i saw my CHT reading between L is higher about 10 compare to R, does it normal?. please advise ... Link to comment Share on other sites More sharing options...
Roger Lee Posted June 3, 2014 Report Share Posted June 3, 2014 Yes that is normal. I doubt you rarely see them equal. 5-10F is normal. Link to comment Share on other sites More sharing options...
Anticept Posted June 3, 2014 Report Share Posted June 3, 2014 There's a % tolerance for the sensors, and combined with installation error (not actual problem errors, but just slight deviations due to wiring, engine, and instrument assembly), it's not surprising to see a little bit of a drift. More important is to watch for trends. If the spread is growing, or you see a significant spread while revving up the engine as the temperatures increase, it may be indicative of a problem cropping up then. Link to comment Share on other sites More sharing options...
Tony & Rose Posted June 4, 2014 Report Share Posted June 4, 2014 I have a 10-20 spread, depending on configuration. However, as long as my oil temp remains between the two numbers I'm a happy camper.... Link to comment Share on other sites More sharing options...
Roger Lee Posted June 4, 2014 Report Share Posted June 4, 2014 Hi Tony, It's about time you popped up here. How is everything? How is Rose? What's new? How are the wild beast on the farm? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.