Anticept Posted September 3, 2014 Report Share Posted September 3, 2014 Hi MarcF! Thanks for the feedback as well! I'll advise FD that their manual is incorrect about top vs bottom. Link to comment Share on other sites More sharing options...
WmInce Posted September 3, 2014 Report Share Posted September 3, 2014 Flaps OperationManual_1.5.pdf Solved. The manual that was sent with the board was not the right one. I put in attached file the good one (the relay is included on the board and not ijn the firewall). To select European vs US Display of flap position, the manual is inclear. The pin 1 is effectively at the bottom (not on the top) of the board, where the gap is. Hope this could help another pilot ... Thanks for all and thanks again to Anticept for its advices. Merci beaucoup, Marc. . . . Link to comment Share on other sites More sharing options...
Anticept Posted September 3, 2014 Report Share Posted September 3, 2014 Please be aware that's for new model flap controllers, where the relays are on the controller itself, and the connection is a computer type connection. (It's a DE-9, likely male but haven't taken one apart yet) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.