coppercity Posted October 1, 2015 Report Share Posted October 1, 2015 Is there anything special about the Rotax ignition cables or can it be replaced with common 7mm HT cable? Link to comment Share on other sites More sharing options...
Roger Lee Posted October 1, 2015 Report Share Posted October 1, 2015 Hi Eric, Are you talking about the spark plug wires? If so use regular wire core. No carbon or other hot shot new age plug wires. They screw into the coils and the plug boots. People around humid climates would do well to use die-electric grease on the ends before screwing them on. Link to comment Share on other sites More sharing options...
coppercity Posted October 2, 2015 Author Report Share Posted October 2, 2015 Thanks Roger! Just going thru things while my parachute is out for repack. Link to comment Share on other sites More sharing options...
Roger Lee Posted October 2, 2015 Report Share Posted October 2, 2015 Unless one is bad no reason to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.