Tom Baker Posted January 10, 2016 Report Share Posted January 10, 2016 Submitting an MRA is not a big deal as long as I can find the LOA that authorizes it. Have not found one yet. Seems most of the ones on this site are several years old. Nothing current. Is there a place to go see the current list? Guess I need to ask FDUSA hoping they have a current list and there is one for this modification... Just give them a call. It is my understanding the FDUSA can now make the decision on simple changes like you want to do without having to talk to the folks in Germany. Link to comment Share on other sites More sharing options...
Tom Baker Posted January 10, 2016 Report Share Posted January 10, 2016 Yeah, I can't find the FD list of LOAs (except those on this site). I used to be able to find them. Any clue anyone? Doug, I don't ever recall seeing a list anyplace besides here on this site. Also be aware that there is a list within the list. Link to comment Share on other sites More sharing options...
Doug G. Posted January 10, 2016 Report Share Posted January 10, 2016 Yes, fully aware of that. I remember finding them quite a while ago and it wasn't easy to find then. Link to comment Share on other sites More sharing options...
AZAV8OR Posted January 11, 2016 Report Share Posted January 11, 2016 Just give them a call. It is my understanding the FDUSA can now make the decision on simple changes like you want to do without having to talk to the folks in Germany. Concur. I just got an FDUSA-generated MRA to replace the oil cooler on the radiator/oil cooler assy. I filled out the form from the FDUSA site and Arian processed it. Link to comment Share on other sites More sharing options...
Aero-Nut Posted January 12, 2016 Author Report Share Posted January 12, 2016 I got a hold of Arian and he sent me the form to complete and told me to return it and $65.00 for processing... Link to comment Share on other sites More sharing options...
Aero-Nut Posted February 2, 2016 Author Report Share Posted February 2, 2016 Here is my install of the 796 replacing the 496. It was a little tight but fit fine. The autopilot is missing as I am waiting for Trutrak to send me the Vizion upgrade. I did a faux carbon fiber finish on the panel. Now I want to do the other three panels as well. Just need to see if one can get a full panel sticker set from FD. Link to comment Share on other sites More sharing options...
Aero-Nut Posted February 2, 2016 Author Report Share Posted February 2, 2016 The Hobbs is in the Dynon. Waiting for FDUSA to send he panel bezel to relocate the carb and cabin heat to the dash. Link to comment Share on other sites More sharing options...
Tom Baker Posted February 2, 2016 Report Share Posted February 2, 2016 Where are you going to relocate the Carb Heat/Cabin Heat control knobs and the Hobbs Meter? Only some of the airplanes have the secondary Hobbs meter. Link to comment Share on other sites More sharing options...
FlyingMonkey Posted February 2, 2016 Report Share Posted February 2, 2016 I got a hold of Arian and he sent me the form to complete and told me to return it and $65.00 for processing... Hmph, it used to be $50.00. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.