procharger Posted April 20, 2016 Report Share Posted April 20, 2016 Got engine off took it apart, got bolt and flywheel off what a PITA couldn't find impeller tool so had to order it today, going to do 5 year hose deal a year early and 100 hour early too. Let's see new floats, carbs. done, new modules,new flywheel, new plugs, header wrap, new hoses, new oil, new antifreeze, what did I leave out? oh yea sprag Link to comment Share on other sites More sharing options...
Anticept Posted April 20, 2016 Report Share Posted April 20, 2016 ?? Impeller tool? Are you getting into the water pump? Link to comment Share on other sites More sharing options...
procharger Posted April 20, 2016 Author Report Share Posted April 20, 2016 Yes pulled pump.Can I get the cover off with impeller still on? I think it is screwed on to the shaft, at base coming through cover. Link to comment Share on other sites More sharing options...
Anticept Posted April 20, 2016 Report Share Posted April 20, 2016 Oh, right, you are after the sprag. Yeah housing has to come off, which means pulling the impeller. It's a little difficult to get the impeller off with homebuilt tools, it's really brittle. Link to comment Share on other sites More sharing options...
procharger Posted April 21, 2016 Author Report Share Posted April 21, 2016 I am following simple flow chart, it's broken, pulled it out. Link to comment Share on other sites More sharing options...
Anticept Posted April 21, 2016 Report Share Posted April 21, 2016 For some reason I forgot about the sprag, and only remembered that you're changing the flywheel. That's why I was so confused! Link to comment Share on other sites More sharing options...
procharger Posted April 21, 2016 Author Report Share Posted April 21, 2016 A few more BOATsI [ break out another thousand] I 'll have a new motor. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.