NC Bill Posted May 15, 2016 Report Share Posted May 15, 2016 If anyone has upgraded their CTLS from the Digiflite II VS to the VISION autopilot I'd appreciate knowing if you found new settings were needed, and if so what you changed them to. I have upgraded and find my old settings need tweaking. Trutrak says that's to be expected. Thanks, Bill Link to comment Share on other sites More sharing options...
CT4ME Posted May 15, 2016 Report Share Posted May 15, 2016 I haven't required any tweaking since upgrading from DFIIvs to Vizion. However, since I sent the DFII back first, I asked them to note the settings and adjust the VIZION accordingly. 'Not sure if they did, but it worked great out of the box. Link to comment Share on other sites More sharing options...
rhanson Posted May 16, 2016 Report Share Posted May 16, 2016 I had trouble with my TT Viz 385: had to make several changes. Sent them to Runtoeat. ( am not near plane now ). RH C135CT Link to comment Share on other sites More sharing options...
Marco01 Posted May 16, 2016 Report Share Posted May 16, 2016 when upgrading from DFIIvs to vizion, received back with same setting: didn't notice any changes and everything works fine so far... Link to comment Share on other sites More sharing options...
andyb Posted May 16, 2016 Report Share Posted May 16, 2016 I upgraded and liked it. I had to reduce the sensitivity setting. Wiring it to have Dynon mode capability was a big plus. Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.