Roger Lee Posted October 26, 2016 Report Share Posted October 26, 2016 " If the pin is still in the hole" The float guide pin is completely coming out of the hole and then fuel comes out the hole. If you plug the hole on the outside it doesn't keep the pin from coming out on the inside. Then the single float can not maintain the fuel level. Link to comment Share on other sites More sharing options...
Anticept Posted October 26, 2016 Author Report Share Posted October 26, 2016 I'm going to try this. I have a carb sitting on the bench. I'll put 4.4 psi fuel pressure on with one float and see if it will hold before overflow. Link to comment Share on other sites More sharing options...
Tom Baker Posted October 26, 2016 Report Share Posted October 26, 2016 I'm going to try this. I have a carb sitting on the bench. I'll put 4.4 psi fuel pressure on with one float and see if it will hold before overflow. It may hold on the bench, but not hold while running. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.