Jump to content

Placards


Al Downs

Recommended Posts

Many of the labels and placards are wearing off and looking bad. Some can't even be read. I am in the process of getting some made up. These would be on a sheet and cut so they can be peeled off and applied I have a list of 29 different placard that I got from Flight Design. They will be in a set so you could use what you need and save the rest. If anyone else might be interested let me know and when I get a price I will let you know.

Link to comment
Share on other sites

I received my first set of placards and the quality looks as good as the original.

 

I will have them available soon but I want change some sizes as some of them are a little large. See the picture for the placards available. There are about 40 individual placards. The cost for the entire set is $110 including shipping.

 

Let me know if you are interested. I will be working on verifying the sizes. For the one that goes around the flap switch I want to see if they can add the speed setting and flap degree as in my original. If you have something for your model that is different, let me know and I will try to get it included.

 

If you do have something I would need a picture and the length and width so it can be the correct scale.

post-535-0-71951500-1480611661_thumb.jpg

Link to comment
Share on other sites

I checked the labels and had some resized and some changed. Those that would like labels, maybe it is easier to tell me which ones you need as there as some that don't get abused and you don't need them. Selling them separately will be less expensive. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...