procharger Posted January 17, 2017 Report Share Posted January 17, 2017 A lot of information has come out lately including today about the torque on the heads, its a good thing because mine is leaking again, not sure why, same place as before on top of number 2 cylinder guess I will be taking it apart for the third time in the last 1 1/2 years. Link to comment Share on other sites More sharing options...
Roger Lee Posted January 18, 2017 Report Share Posted January 18, 2017 If the leak is just on the valve cover then don't bother. If it's actually the cylinder head it may only need lapping and if it's the jug at the base an "O" ring. Link to comment Share on other sites More sharing options...
Tom Baker Posted January 18, 2017 Report Share Posted January 18, 2017 I know this has been discussed this before, but have you installed the double ring seal on the studs at the base of the cylinder? Link to comment Share on other sites More sharing options...
procharger Posted January 18, 2017 Author Report Share Posted January 18, 2017 Not valve cover, right between cyl. and head on top. Link to comment Share on other sites More sharing options...
Roger Lee Posted January 18, 2017 Report Share Posted January 18, 2017 Try this new torque procedure first before doing anything else. Link to comment Share on other sites More sharing options...
FredG Posted January 18, 2017 Report Share Posted January 18, 2017 Pro charger - what year was the engine manufactured? Link to comment Share on other sites More sharing options...
Tom Baker Posted January 19, 2017 Report Share Posted January 19, 2017 I know this has been discussed this before, but have you installed the double ring seal on the studs at the base of the cylinder? Since you didn't answer I thought I would ask again. Link to comment Share on other sites More sharing options...
procharger Posted January 24, 2017 Author Report Share Posted January 24, 2017 2007 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.