Runtoeat Posted June 7, 2017 Report Share Posted June 7, 2017 Greg, I have had my fuel filler resealed on my CTSW. This is held in with 4 screws. Due to the screws retaining my filler, my mechanic used a new gasket and Proseal to seal the filler. It appears that you have a CTLS based on your comments about the line man popping it out of the wing. The CTLS has no retention screws and is just held in by the epoxy. In this case, I believe that you would want to use the Creme Weiss epoxy since this would seal and retain the filler. Roger has expertise and experience but isn't in your area. Someone with good experience and expertise on CTLS would be best for repair. Thanks for the good info for the temporary fix with foil and blue tape. Link to comment Share on other sites More sharing options...
Duane Jefts Posted June 7, 2017 Report Share Posted June 7, 2017 Copper City on this site has repaired some and should know the correct epoxy to use. Link to comment Share on other sites More sharing options...
coppercity Posted June 8, 2017 Report Share Posted June 8, 2017 The product I got from Flight Design to repair my filler caps was a two part epoxy called EpoFlex I believe. Not sure that product is still available but check with Arian at FDUSA, they can likely send you a small batch of the current product to get the job done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.