Tip Posted September 1, 2017 Report Share Posted September 1, 2017 Does anyone known where to buy the phillips head cam locks? And what size are they? Thanks Link to comment Share on other sites More sharing options...
Roger Lee Posted September 1, 2017 Report Share Posted September 1, 2017 I know Aircraft Spruce has cam locks. Not sure about phillips head. Link to comment Share on other sites More sharing options...
Anticept Posted September 2, 2017 Report Share Posted September 2, 2017 They are milspec products MS26S8-10. Don't get the stainless versions. They are not stainless receptacles and you will wear the receptacles out. http://www.milspecproducts.com/c_spec_2600_steel_studs__phillips Retainers (you can press these on with deep sockets, i think 10 or 11mm works): http://www.milspecproducts.com/inc/sdetail/ms2600_lw/1014/1019 Aircraft spruce does sell some of their stuff. Link to comment Share on other sites More sharing options...
Tip Posted September 2, 2017 Author Report Share Posted September 2, 2017 Thanks Roger & Cory! Link to comment Share on other sites More sharing options...
2FlyAgain Posted September 3, 2017 Report Share Posted September 3, 2017 I have a worn out receptacle. How does one go about getting that repaired? Thanks in advance. Link to comment Share on other sites More sharing options...
Anticept Posted September 3, 2017 Report Share Posted September 3, 2017 Message flight design. You're probably going to have to cut the old one out and lay in a new one, get that information from them. Not 100% sure on how these are installed. Link to comment Share on other sites More sharing options...
Roger Lee Posted September 3, 2017 Report Share Posted September 3, 2017 Watch: Link to comment Share on other sites More sharing options...
2FlyAgain Posted September 3, 2017 Report Share Posted September 3, 2017 Corey and Roger, Thanks guys!! As always your expertise and willingness to share it is most appreciated. --Mark Link to comment Share on other sites More sharing options...
WmInce Posted September 4, 2017 Report Share Posted September 4, 2017 2 hours ago, 2FlyAgain said: Corey and Roger, Thanks guys!! As always your expertise and willingness to share it is most appreciated. --Mark +1 I would also add Tom to that list. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.