Search the Community
Showing results for tags 'rotax 912uls'.
Found 3 results
My engine has suddenly developed Rough Start-ups but smooths nicely after about 4-5 seconds. I have pulled the prop through as normal prior to each starting and ONE time, It was very difficult to pull it past Top Dead Center... almost like Hydro Lock. . Since it is a 2009 model, I opted for getting the NEWER modules with Soft Start but that did not solve the problem. Any Suggestions? BTW - The older modules will be listed on EBAY in the next few days. My thoughts at this point are... * Stuck Valve *Fouled Plugs due to OIL in the cylinder (Hydro Lock) SEE THE VIDEO CTLS - Electronic ignition module change.mp4
Please send me some contacts to make the Annual Inspection for LSA
Hello all My left CHT first fluctuates and then drops to low end of range after 10-20 minutes of flight. I am assuming the CHT probe is probably u/s. Can anyone assist with the part # and a place to purchase the CHT for a CTLS, Dynon 180 EMS and Rotax of course. Many thanks Niels