Roger Lee Posted February 5, 2012 Report Share Posted February 5, 2012 Here is a quick video on how to remove the metric master cylinder fittings from the Marc brake master cyl. and then re-installing them on the Matco master cyl. Sorry for the quality and lack of prep. I was in the middle of this and decided to video it for everyone. Link to comment Share on other sites More sharing options...
J L M Posted February 6, 2012 Report Share Posted February 6, 2012 Roger, is this what I would need to replace so I could stop pumping the handle to get it to stop? Link to comment Share on other sites More sharing options...
Roger Lee Posted February 6, 2012 Author Report Share Posted February 6, 2012 Hi JLM, If you replace the master cylinder and take the springs out of the brake pads (easy to do, only 2 screws) then your pumping and chance of totally loosing your brakes should go away. If the pumping isn't stopped eventually you will loose your brakes and there is no way to predict when it will happen. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.