Al Downs Posted April 13, 2018 Report Share Posted April 13, 2018 When I switch from the Garmin 496 to the 696 I will also be removing the HS34 HSI EXPANSION MODULE. Can I just remove it and ts wiring? Link to comment Share on other sites More sharing options...
Anticept Posted April 13, 2018 Report Share Posted April 13, 2018 No, you have to do some rewiring of the system. Just get a serial extension cable, i believe a DB25 connector, and mount the HS34 near the EFIS. You don't want to drop the HS34. It provides a lot of functionality. Link to comment Share on other sites More sharing options...
LS Bruce Posted April 13, 2018 Report Share Posted April 13, 2018 Agree. It fits nicely above. Link to comment Share on other sites More sharing options...
WmInce Posted April 13, 2018 Report Share Posted April 13, 2018 I think that is awesome. Max utilization of real estate. What's more . . . the most bang for the buck. Link to comment Share on other sites More sharing options...
Al Downs Posted April 14, 2018 Author Report Share Posted April 14, 2018 Found out that if you have a Garmin SL 30 and want to remove the HS34 it is not so easy. So I am going to relocate the HS34 and keep it. Simple to change from a Garmin 496 to the 696 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.