Roger Lee Posted June 4, 2018 Report Share Posted June 4, 2018 You DO NOT need to spin the prop if you pre-fill the filer. Link to comment Share on other sites More sharing options...
John Vance Posted June 4, 2018 Report Share Posted June 4, 2018 1 hour ago, Roger Lee said: You DO NOT need to spin the prop if you pre-fill the filer. Roger- after pre-filling the 825016 filter, does it make a mess when you tip it to horizontal to align the threads? Link to comment Share on other sites More sharing options...
Tom Baker Posted June 5, 2018 Report Share Posted June 5, 2018 Going back to the filter we used to pre fill yes you will make a little mess. I use a corrugated plastic chute for removing the oil filter, and I just leave it in place when installing the new prefilled oil filter. Any oil I lose during installation just runs down into my bucket. If you are quick you won't lose much. Link to comment Share on other sites More sharing options...
John Vance Posted June 5, 2018 Report Share Posted June 5, 2018 OK, thanks Tom. Link to comment Share on other sites More sharing options...
Roger Lee Posted June 5, 2018 Report Share Posted June 5, 2018 I fill three times. I don’t seem to lose any oil, but I put it right on and don’t let it sit horizontal very long. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.