FlyingMonkey Posted September 10, 2018 Report Share Posted September 10, 2018 Hey all... When installing my iFly in the center panel, I was forced to dispose of my beloved yellow/black checklist placard, which I used before every flight. Does anybody know where I can get a replacement sticker without breaking the bank? I had the long thin one, but IIRC there is a rectangular smaller one on some earlier CTSWs. I think either would work for me. If somebody has an image file(s) for them I think I could print it on my printer on a label sheet and cut it out. Link to comment Share on other sites More sharing options...
WmInce Posted September 10, 2018 Report Share Posted September 10, 2018 That will work. OTOH, if you have a "Brother P-Touch" label printer, they do make 1" yellow laminated tape with black print. You could probably stack 2 rows of tape. I am working on that label myself, but have not finished it yet. The software is pretty lame. Link to comment Share on other sites More sharing options...
Tom Baker Posted September 11, 2018 Report Share Posted September 11, 2018 On the one I did I scanned the placard right off the old panel, printed, laminated one side, and added double sided tape to the other. I was able to size it just like I wanted. When done I put it on the Left wing root ahead of the fuel sight tubes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.