sandpiper Posted August 31, 2019 Report Share Posted August 31, 2019 I just started my 12th Condition Inspection on my 2007 CTSW (615 hrs TT) and immediately found a problem with the control of the carb heat flapper valve. Early in the inspection checklist it calls for inspection of the carb heat mechanism. which seemed to work fine. Then noticed on the end of the rod running through the air box that the end opposite where the control cable attaches was hanging loose in its guide hole. Missing were the washer and cotter pin that are supposed to hold it in position. This was easy enough to fix but also easy to miss since the mechanism worked fine. Anyhow, just a heads up. Quote Link to comment Share on other sites More sharing options...
WmInce Posted August 31, 2019 Report Share Posted August 31, 2019 Good catch, John. Quote Link to comment Share on other sites More sharing options...
cdarza Posted November 21, 2020 Report Share Posted November 21, 2020 Another headsup... In the air intake by the carb heat flapper. These rubbery things were loose and might get sucked in to the carb. I just took them off and didn't replace. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.