Bill3558 Posted June 20, 2020 Report Share Posted June 20, 2020 Greetings all. I’m looking for cowling fasteners for my 2008 CTLS. Manual called for 2600-4 size, but they are too short. FD part number is C9996904A. I don’t know if they are the short ones too. Anyone else run into this problem? Quote Link to comment Share on other sites More sharing options...
Tip Posted June 20, 2020 Report Share Posted June 20, 2020 Check EBay. Quote Link to comment Share on other sites More sharing options...
LS Bruce Posted June 21, 2020 Report Share Posted June 21, 2020 My 2008 CTLS uses the 2600-9 size. 1.00 over all length. Look really close at the head and see a tiny “9” stamped. https://milspecproducts.com/c_spec_2600_steel_studs__slotted scroll to the bottom and see the chart. seems the Phillips version is part number 26S8-9 and a Stainless Steel version 26S51-9 https://www.ebay.com/itm/292166291016 Quote Link to comment Share on other sites More sharing options...
Bill3558 Posted June 21, 2020 Author Report Share Posted June 21, 2020 Thank LS. I see the small number now. I have mostly 6’s but a few 9’s that stick out a little bit when latched. Now I understand why. Quote Link to comment Share on other sites More sharing options...
LS Bruce Posted June 21, 2020 Report Share Posted June 21, 2020 Make sure you measure them. Unlikely you would have different ones. An upside down “9” may look like a six. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.