Towner Report post Posted January 11 Where the music input hole is in the panel, there is no plug, just an open hole in the panel. Could this be because the input is wired to the Garmin 496? I do not plan on paying for an XM subscription, so I would like the input back in place. The intercom is a pm 501. Thanks in advance for any help! Quote Share this post Link to post Share on other sites
Tom Baker Report post Posted January 11 It could be that the socket is broken and has fallen behind the panel. Quote Share this post Link to post Share on other sites
Towner Report post Posted January 11 I pulled the panel and looked, but didn’t see the socket or any wires running loose from the Intercom harness Quote Share this post Link to post Share on other sites
GrassStripFlyBoy Report post Posted January 12 It's simply a mini plug for headphones and such, pin #1 on the harness, and ground. Here's what you're looking at: Quote Share this post Link to post Share on other sites
Towner Report post Posted January 12 Thanks for the diagram. Someone else had told me it was at the end position, not center. I’ll take another look tomorrow, but I know there was not a plug hanging anywhere from the harness. I’ll take a better look and see where the proper wire goes now that I know which one to trace. Quote Share this post Link to post Share on other sites
Towner Report post Posted January 12 I was given this diagram, which has a different layout. It is also for the pm 501 Quote Share this post Link to post Share on other sites
GrassStripFlyBoy Report post Posted January 12 Different in appearance sure, same electrical schematic as far as content. Quote Share this post Link to post Share on other sites
