Jump to content

The right tank does not empty


ADAM Alain

Recommended Posts

Hi Adam,

I take it you were flying when this happened? This happens to many due to the flat tank design and the imperfection of the alignment of the instrument panel and the instruments.  Not only in a CT, but in some certified too. Mostly speaking about the ball centering. Next time take a manual dipstick fuel measurement. Then do your flight with the trim  ball 1/2 out to the left and that should take care of your problem and make the tanks drain more equally. If you ever get really low in the left tank you can fly one full ball out to the left and that will not only feed the engine, but transfer fuel to the left tank. The hoses are approximately 5/16" US equivalent  (7.9mm) (7.5mm is 19/64" most likely for you) so it takes a while, but it does work. I'm sure many will weigh in here.

 

Remember:

The fuel follows the ball. Ball out to the left fuel transfers left. Ball out to the right and the fuel transfers to the right. 

A half ball out left makes things more equally in your situation.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...