Bill3558 Posted August 31, 2021 Report Share Posted August 31, 2021 When I pulled the lower cowling off to replace my oil pressure sender, the oil cooler/radiator was hanging from the hoses. All three rubber mounts had failed, and the cowling was the only thing holding it in place. My mechanic safety wired it as a temp repair. Have any of you guys had this problem? Quote Link to comment Share on other sites More sharing options...
Bill3558 Posted August 31, 2021 Author Report Share Posted August 31, 2021 Can’t find a part number. They are rubber grommets with threaded ends. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted August 31, 2021 Report Share Posted August 31, 2021 https://www.amazon.com/gp/product/B07PDX7RGZ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Quote Link to comment Share on other sites More sharing options...
Bill3558 Posted September 1, 2021 Author Report Share Posted September 1, 2021 Thanks Tom! Quote Link to comment Share on other sites More sharing options...
Anticept Posted September 1, 2021 Report Share Posted September 1, 2021 I would recommend Lord Sandwich mount H6122. They last for years before showing signs of wear. Note that *technically* an MRA is required, but I'm not your mom Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted September 1, 2021 Report Share Posted September 1, 2021 I use the same ones as Tom from Amazon. These are nothing special. Because of the angle and stress FD has on then then they can break. I try to straighten them as much as possible when I install them, but there is only so much you can do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.