johnr Posted September 28, 2011 Report Share Posted September 28, 2011 Hello all just joined & have a question,I have heard a CTsw will fit into a 20ft container if the prop is removed. Can anyone confirm it & what is the best packing method when timber is not allowed. Now I will continue reading the loads of tech stuff. johnr Link to comment Share on other sites More sharing options...
chanik Posted September 28, 2011 Report Share Posted September 28, 2011 Just barely. https://wiki.umn.edu/pub/CirrusWing/CirrusInfo/fd_poh.pdf Go down 5 pages here and you'll see 245 11/16" for the overall length. Link to comment Share on other sites More sharing options...
Jacques Posted September 28, 2011 Report Share Posted September 28, 2011 remove the spinner (the prop stay there) AND remove the rudder and that will be fine check for the width of the elevator (almost 8') rudder is wrapped in 'bubbles' and put in the cabin wings are suspended on the container's wall main wheels are removed and axles goes on fixed support nose wheel is ''strapped down'' Link to comment Share on other sites More sharing options...
westcoastoz Posted September 28, 2011 Report Share Posted September 28, 2011 Mine was shipped to Fremantle in a 20ft container. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.