procharger Posted May 2, 2016 Report Share Posted May 2, 2016 Is there anyway to plug in modules incorrectly or plug one to wrong side? Link to comment Share on other sites More sharing options...
FastEddieB Posted May 2, 2016 Report Share Posted May 2, 2016 To my recollection, the plugs are identical, so switching them would be easy to do. Should still run fine, just IGN 1 or A would become IGN 2 or B. Can determine which is which by seeing which one is grounded when the IGN switch is on different positions. Selecting "1" should ground "2" and vice versa, OFF should ground both than BOTH should "unground" both. I had to go through this on my Sky Arrow when installing the Bullyhawk Soft Start Module to discover which module was connected to which switch. As an aside, I always like to take a photo before I start unplugging things. Can really come in handy, and has many, many times. Link to comment Share on other sites More sharing options...
Anticept Posted May 2, 2016 Report Share Posted May 2, 2016 Doesn't matter in 912S/UL/ULS. Matters a LOT in the others Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.