Mrfoodflyboy Posted August 21, 2016 Report Share Posted August 21, 2016 I need to replace my tail number decals. I can get them off with a heat gun but how do I remove the glue left behind? Goo Gone? Acetone? Any ideas? I don't want to harm the carbon fiber fuselage. Link to comment Share on other sites More sharing options...
gbigs Posted August 21, 2016 Report Share Posted August 21, 2016 I need to replace my tail number decals. I can get them off with a heat gun but how do I remove the glue left behind? Goo Gone? Acetone? Any ideas? I don't want to harm the carbon fiber fuselage. Isopropyl Alcohol cleans safely and without a toxic problem for you. Link to comment Share on other sites More sharing options...
Anticept Posted August 22, 2016 Report Share Posted August 22, 2016 Mineral spirits or toluene if isopropyl doesn't do it. Link to comment Share on other sites More sharing options...
SportFlyer1 Posted September 18, 2016 Report Share Posted September 18, 2016 If you want to go more organic, you can use extra virgin olive oil or just about any cooking oil or Pam. I got some stubborn glue off my side windows without damaging the acrylic. The oil/glue residue had to be removed with Composiclean window cleaner. The oil seems to take the grip out of the glue, then the whole mess can be cleaned off as normal. Link to comment Share on other sites More sharing options...
Roger Lee Posted September 18, 2016 Report Share Posted September 18, 2016 Warm up the old decal material and use Goofoff. I have seen two planes take off their entire decal setup. It is still going to be work. Use a terry cloth rag. It scrubs better than a smooth one. After you get through scrubbing with the Goofoff or any other cleaner make sure you wipe and clean that area off. Link to comment Share on other sites More sharing options...
Al Downs Posted September 19, 2016 Report Share Posted September 19, 2016 I just finished doing that on two CTLS's. You can use acetone and it that doesn't work you can use laquer thinner. Neither one did any damage to the paint. When heating the old number don't get them too hot and burn the paint. Use a plastic scraper. Remember the paint is much softer when warm so it is possible to scrape the paint. Lots of work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.