Juan Posted July 3 Report Share Posted July 3 Hi I'm wondering if any of you guys have 3D self-printed accesories for a CTLS. As an example I downloaded a holder for the Bose A20 Headset control https://www.thingiverse.com/thing:5631881 Best Juan Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted July 3 Report Share Posted July 3 Off the top of my head: - headset hooks for the front of the wing spars - gopro (refuel) bracket to replace the whiskey compass mount location - finger hook to allow opening the foot locker easier - ring around the fiberglass flange where the stick comes out of the floor, to keep me from smashing it when getting in - Sentry mount - inreach mount - organizer for between the seats (below the audio jacks) I guess I've done a few. Quote Link to comment Share on other sites More sharing options...
Ulmo133 Posted July 4 Report Share Posted July 4 Hi. I only made the bose holder for two remotes but don't find the link of the one I made. I also try this one but it's not working on mine : @shiny.ice do you have link for this list ? Good day. Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted July 4 Report Share Posted July 4 2 hours ago, Ulmo133 said: @shiny.ice do you have link for this list ? They're all my own designs, I don't think I've uploaded any of them. I'll work on some photos at least. Quote Link to comment Share on other sites More sharing options...
Ulmo133 Posted July 4 Report Share Posted July 4 Thanks @shiny.ice I tried some elements but at the end I don't know how to design a 3D model for the printer. I just know how to print. Nice idea for the protection for the flange. I was looking for a cover to hide the hole when I remove the stick from the passenger seat. Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted July 4 Report Share Posted July 4 6 hours ago, Ulmo133 said: Thanks @shiny.ice Nice idea for the protection for the flange. I was looking for a cover to hide the hole when I remove the stick from the passenger seat. Oh, you're in luck. I designed and printed one. The real version is full-coverage, but the blue one in the pic is cutaway to show that it does not interfere. Per my MRA on the stick removal, the empty part shown in the pic needs spacers and bolts in place, unlike how the picture shows it. The spacers need to be metal. https://www.printables.com/model/933094-ctls-fdct-stick-removal-cover Note the license on the .stl, not for commercial use. Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted July 4 Report Share Posted July 4 Here's the spacer. https://www.printables.com/model/933096-ctls-fdct-stick-removal-spacer-and-keeper Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted July 4 Report Share Posted July 4 And here's the piece to keep me from crushing the fiberglass opening on the left side. https://www.printables.com/model/933104-ctls-left-stick-opening-protector Quote Link to comment Share on other sites More sharing options...
Ulmo133 Posted July 5 Report Share Posted July 5 Hi. Thank you. I will try to print it but first I will check the measurement tomorrow as I have the SW. No problem for the licence ! I will show you the result. Good day. Quote Link to comment Share on other sites More sharing options...
Juan Posted July 5 Author Report Share Posted July 5 Thanks a lot @shiny.ice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.